Test Overview
The AM-H2S Holographic Weapon Sight was subjected to a series of environmental, mechanical, and optical performance tests in accordance with MIL-STD-810G/H. The purpose of these tests was to verify the product’s reliability, durability, and functional stability under simulated operational and environmental conditions.
All tests were conducted on production-representative samples, and the results demonstrate that the AM-H2S meets the applicable performance requirements defined in the test standard.
Test Items and Results
|
No. |
Test Item |
Technical Requirement (MIL-STD-810G/H) |
Test Result |
Remarks |
|
1 |
Appearance |
Screws remain firmly secured; all components undamaged. |
Pass |
|
|
2 |
Internal Cleanliness |
No surface defects |
Pass |
|
|
3 |
Moving Mechanism |
Smooth and stable movement, reliable operation |
Pass |
|
|
4 |
Holographic Reticle Brightness |
Brightness adjustment button reliable |
Pass |
Brightness adjustable in 20 levels |
|
5 |
Parallax |
Horizontal parallax ≤ 1 MOA |
Pass |
Measured at 100 m |
|
6 |
Reticle Adjustment Range |
From center to up, down, left, right: 40 MOA |
Pass |
|
|
7 |
Horizontal / Vertical Deviation |
Horizontal deviation ≤ 3 clicks |
Pass |
Vertical deviation: 1 click |
|
8 |
Shock Test |
700G, 100 cycles |
Pass |
Zero shift < 1 MOA |
|
9 |
Immersion Test |
1 m water depth, 0.5 hour |
Pass |
Sample and battery compartment no water ingress |
|
10 |
High Temperature Test |
55℃, 2 h |
Pass |
|
|
11 |
Low Temperature Test |
−30℃, 2 h |
Pass |
|
Additional Test Information
Although the AM-H2S is designed with a maximum shock resistance of up to 1200G, the shock test in this evaluation was conducted at 700G in accordance with MIL-STD-810G/H, a shock level commonly referenced in the industry as representative of recoil forces encountered on 5.56×45mm–class platforms.
The AM-H2S is rated to IP67 as standard, providing protection against water immersion up to 1 meter for 30 minutes.
An enhanced IP68 waterproof rating (up to 5 meters for 30 minutes) is available upon request for customized applications.
Notes
- MIL-STD-810G/H is a test method standard and does not constitute product certification.
- Test results are based on controlled laboratory conditions using production-representative samples.
- Actual performance may vary depending on installation, host platform, and operating environment.